Skip to content
Error Code

Bertazzoni Dishwasher E6 Error Code

Error code · Dishwasher

VERIFIED

Error code E6 / E06
Appliance Dishwashers

A dishwasher needs to know how warm its water is, and it learns that from a thermal sensor. E6 (E06 in some lists) tells you the board sees that sensor as cut: an open circuit, as if the wire to it had been broken.

What the manual lists

  1. Check the inlet water temperature.
  2. Check the thermistor.
  3. Check the PCB.

E6 and E7 share these three lines. The manual prints them together, one entry for the sensor cut and one for the sensor short.

Open versus short

E6E7
Manual’s wordsThermal sensor cutThermal sensor short
Circuit pictureOpen, no current pathShorted, current bypasses the sensor
Checks listedInlet water temperature, thermistor, PCB

Factory mode note

The printed table has a remark, “only appeared in the factory mode”, close to the E6 and E7 entries. It is unclear from the page which entries it covers, and the manual does not explain it further.

For the owner

There is no owner step in the source other than the first technician check, the temperature of the water coming in. Do not take the machine apart. Cancel the program and let a technician read the sensor with a meter.

Why the inlet water temperature comes first

The first check is not a part at all. It asks what temperature the water is when it enters the machine, which gives the technician a baseline to compare against what the sensor reports. You can help by noting whether your hot supply was running normally when the code appeared.

Neighbouring faults

  • E7: the same sensor reported as a short circuit
  • E3: a heating timeout, which involves the same thermistor

Dishwasher sensor repair, San Francisco

To have a technician test the sensor behind an E6, call (415) 692-0756. Bertazzoni dishwasher visits in San Francisco go faster with the model number ready.

Model compatibility: Bertazzoni reuses codes across series and model years, so E6 / E06 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Thermal sensor cut (open circuit).

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Bertazzoni appliance?

Book a specialist visit for a clear estimate and approval before any repair.

FAQ

Frequently asked questions

Ready to get your Bertazzoni appliance working again?

Book a repair online or call us — clear estimates and approval before any repair work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area San Francisco Bay Area, California

Request your repair

(415) 692-0756 Book a Repair