Brew Unit Designs Change Across Successive Generations
Two machines that look the same can use different brew units inside. Find out why model and generation matter and how to decide between…
Blog
Appliance care tips, repair guides and company news.
Repair guides
Why a Thermometer Reading Can Differ From the Display Set Point
A set point is a target, not a measurement, so a thermometer and the display often disagree. Here is how to take a fair…
Accessing the Sump and Filter for Inspection
Most drain, odor and cleaning complaints begin at the sump. Learn what an owner can safely lift out, what to look for and when…
Each Zone Has Its Own Power Module on Many Induction Models
When one induction zone fails and the others run normally, the layout of the electronics explains why. Learn what a power module does and…
What the Approved Maintenance Program Can and Cannot Resolve
A cleaning or descaling program clears scale and residue, but it cannot repair worn seals, weak pumps or grinder faults. This article draws the…
Model Label Locations Differ by Oven Configuration
The model number decides which parts and wiring diagrams apply, but the label is not always where owners expect. Learn where to look without…
Book a repair
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Phone
(415) 692-0756
Hours
Mon–Sat: 8:00 AM – 7:00 PM
Service area
San Francisco Bay Area, California